If you are only interested in the first item emitted by an Observable, or the first item that meets some criteria, you can filter the Observable with the First operator.
In some implementations, First is not implemented as a filtering operator that returns an
Observable, but as a blocking function that returns a particular item at such time as the source Observable
emits that item. In those implementations, if you instead want a filtering operator, you may have better
luck with Take(1) or ElementAt(0).
In some implementations there is also a Single operator. It behaves similarly to First except that it waits until the source Observable terminates in order to guarantee that it only emits a single item (otherwise, rather than emitting that item, it terminates with an error). You can use this to not only take the first item from the source Observable but to also guarantee that there was only one item.
ReactiveXfindfindIndexfirstTBD
In RxGroovy, this filtering operator is implemented as first, firstOrDefault,
and takeFirst.
Somewhat confusingly, there are also BlockingObservable operators called first
and firstOrDefault that block and then return items, rather than immediately returning
Observables.
There are also several other operators that perform similar functions.
To filter an Observable so that only its first emission is emitted, use the
first operator with no parameters.
first()
You can also pass a predicate function to first, in which case it will produce an
Observable that emits only the first item from the source Observable that the predicate evaluates as
true.
first(Func1)
The firstOrDefault operator is similar to first, but you pass it a default item
that it can emit if the source Observable fails to emit any items
firstOrDefault(T)
firstOrDefault also has a variant to which you can pass a predicate function, so that its
Observable will emit the first item from the source Observable that the predicate evaluates as
true, or the default item if no items emitted by the source Observable pass the predicate.
firstOrDefault(T)
The takeFirst operator behaves similarly to first, with the exception of how
these operators behave wihen the source Observable emits no items that satisfy the predicate. In such a
case, first will throw a NoSuchElementException while takeFirst
will return an empty Observable (one that calls onCompleted but never calls
onNext).
takeFirst(Func1)
The single operator is similar to first, but throws a
NoSuchElementException if the source Observable does not emit exactly one item before
successfully completing.
single()
single also has a version that accepts a predicate, and emits the sole item emitted by the
source Observable that matches that predicate, or notifies of an exception if exactly one such item does
not match.
single(Func1)
As with firstOrDefault there is also a singleOrDefault that emits a default
item if the source Observable is empty, although it will still notify of an error if the source
Observable emits more than one item.
singleOrDefault(T)
And there is also a version of singleOrDefault that takes a predicate function and emits
the sole item from the source Observable that matches that predicate, if any; the default item if no
such items match; and makes an error notification if multiple items match.
singleOrDefault(Func1,T)
first, firstOrDefault, single, singleOrDefault, and
takeFirst do not by default operate on any particular
Scheduler.
BlockingObservable Methods
The BlockingObservable methods do not transform an Observable into another, filtered
Observable, but rather they break out of the Observable cascade, blocking until the Observable emits
the desired item, and then return that item itself.
To turn an Observable into a BlockingObservable so that you can use these methods, you can
use either the Observable.toBlocking or BlockingObservable.from methods.
Observable.toBlocking()BlockingObservable.from(Observable)
To retrieve the first emission from a BlockingObservable, use the
first method with no parameters.
BlockingObservable.first()
You can also pass a predicate function to the first method to retrieve the first emission
from a BlockingObservable that satisfies the predicate.
BlockingObservable.first(Func1)
As with the filtering operators, the first method of BlockingObservable will
throw a NoSuchElementException if there is no first element in the source
BlockingObservable. To return a default item instead in such cases, use the
firstOrDefault method.
BlockingObservable.firstOrDefault()
And, as with first, there is a firstOrDefault variant that takes a predicate
function as an argument and returns the first item from the source BlockingObservable
that satisfies that predicate, or a default item instead if no satisfying item was emitted.
The single operator is similar to first, but throws a
NoSuchElementException if the source Observable does not emit exactly one item before
successfully completing.
single()
single also has a version that accepts a predicate, and returns the sole item emitted by the
source Observable that matches that predicate, or throws an exception if exactly one such item does
not match.
single(Func1)
As with firstOrDefault there is also a singleOrDefault that returns a default
item if the source Observable is empty, although it will still throw an error if the source
Observable emits more than one item.
singleOrDefault(T)
And there is also a version of singleOrDefault that takes a predicate function and returns
the sole item from the source Observable that matches that predicate, if any; the default item if no
such items match; and throws an error if multiple items match.
singleOrDefault(Func1,T)
The next operator blocks until the BlockingObservable emits another item, and
then returns that item. You can call this function repeatedly to get successive items from the
BlockingObservable, effectively iterating over its emissions in a blocking fashion.
The latest operator is similar, but rather than blocking to wait for the next emitted item,
it immediately returns the most-recently-emitted item, and only blocks if the Observable has not yet
emitted anything.
The mostRecent operator similarly allows you to iterate over the emissions of a
BlockingObservable, but its Iterable always immediately returns a value: either a default
item you provide (if the BlockingObservable has not yet emitted an item), or the latest
item the BlockingObservable has emitted.
mostRecent(T)
In RxJava, this filtering operator is implemented as first, firstOrDefault,
and takeFirst.
Somewhat confusingly, there are also BlockingObservable operators called first
and firstOrDefault that block and then return items, rather than immediately returning
Observables.
There are also several other operators that perform similar functions.
To filter an Observable so that only its first emission is emitted, use the
first operator with no parameters.
Observable.just(1, 2, 3)
.first()
.subscribe(new Subscriber<Integer>() {
@Override
public void onNext(Integer item) {
System.out.println("Next: " + item);
}
@Override
public void onError(Throwable error) {
System.err.println("Error: " + error.getMessage());
}
@Override
public void onCompleted() {
System.out.println("Sequence complete.");
}
});Next: 1 Sequence complete.
first()
You can also pass a predicate function to first, in which case it will produce an
Observable that emits only the first item from the source Observable that the predicate evaluates as
true.
first(Func1)
The firstOrDefault operator is similar to first, but you pass it a default item
that it can emit if the source Observable fails to emit any items
firstOrDefault(T)
firstOrDefault also has a variant to which you can pass a predicate function, so that its
Observable will emit the first item from the source Observable that the predicate evaluates as
true, or the default item if no items emitted by the source Observable pass the predicate.
firstOrDefault(T)
The takeFirst operator behaves similarly to first, with the exception of how
these operators behave wihen the source Observable emits no items that satisfy the predicate. In such a
case, first will throw a NoSuchElementException while takeFirst
will return an empty Observable (one that calls onCompleted but never calls
onNext).
takeFirst(Func1)
The single operator is similar to first, but throws a
NoSuchElementException if the source Observable does not emit exactly one item before
successfully completing.
single()
single also has a version that accepts a predicate, and emits the sole item emitted by the
source Observable that matches that predicate, or notifies of an exception if exactly one such item does
not match.
single(Func1)
As with firstOrDefault there is also a singleOrDefault that emits a default
item if the source Observable is empty, although it will still notify of an error if the source
Observable emits more than one item.
singleOrDefault(T)
And there is also a version of singleOrDefault that takes a predicate function and emits
the sole item from the source Observable that matches that predicate, if any; the default item if no
such items match; and makes an error notification if multiple items match.
singleOrDefault(Func1,T)
first, firstOrDefault, single, singleOrDefault, and
takeFirst do not by default operate on any particular
Scheduler.
BlockingObservable Methods
The BlockingObservable methods do not transform an Observable into another, filtered
Observable, but rather they break out of the Observable cascade, blocking until the Observable emits
the desired item, and then return that item itself.
To turn an Observable into a BlockingObservable so that you can use these methods, you can
use either the Observable.toBlocking or BlockingObservable.from methods.
Observable.toBlocking()BlockingObservable.from(Observable)
To retrieve the first emission from a BlockingObservable, use the
first method with no parameters.
BlockingObservable.first()
You can also pass a predicate function to the first method to retrieve the first emission
from a BlockingObservable that satisfies the predicate.
BlockingObservable.first(Func1)
As with the filtering operators, the first method of BlockingObservable will
throw a NoSuchElementException if there is no first element in the source
BlockingObservable. To return a default item instead in such cases, use the
firstOrDefault method.
BlockingObservable.firstOrDefault()
And, as with first, there is a firstOrDefault variant that takes a predicate
function as an argument and retrieves the first item from the source BlockingObservable
that satisfies that predicate, or a default item instead if no satisfying item was emitted.
The single operator is similar to first, but throws a
NoSuchElementException if the source Observable does not emit exactly one item before
successfully completing.
single()
single also has a version that accepts a predicate, and returns the sole item emitted by the
source Observable that matches that predicate, or throws an exception if exactly one such item does
not match.
single(Func1)
As with firstOrDefault there is also a singleOrDefault that returns a default
item if the source Observable is empty, although it will still throw an error if the source
Observable emits more than one item.
singleOrDefault(T)
And there is also a version of singleOrDefault that takes a predicate function and returns
the sole item from the source Observable that matches that predicate, if any; the default item if no
such items match; and throws an error if multiple items match.
singleOrDefault(Func1,T)
The next operator blocks until the BlockingObservable emits another item, and
then returns that item. You can call this function repeatedly to get successive items from the
BlockingObservable, effectively iterating over its emissions in a blocking fashion.
The latest operator is similar, but rather than blocking to wait for the next emitted item,
it immediately returns the most-recently-emitted item, and only blocks if the Observable has not yet
emitted anything.
The mostRecent operator similarly allows you to iterate over the emissions of a
BlockingObservable, but its Iterable always immediately returns a value: either a default
item you provide (if the BlockingObservable has not yet emitted an item), or the latest
item the BlockingObservable has emitted.
mostRecent(T)
RxJS implements the first operator. It optionally takes a predicate function as a parameter,
in which case, rather than emitting the first item from the source Observable, the resulting Observable
will emit the first item from the source Observable that satisfies the predicate.
The predicate function itself takes three arguments:
An optional third parameter (named defaultValue) allows you to choose an item
that first will emit if the source Observable does not emit any items (or if
it does not emit the nth item that it expected.
var source = Rx.Observable.range(0, 10)
.first(function (x, idx, obs) { return x % 2 === 1; });
var subscription = source.subscribe(
function (x) { console.log('Next: ' + x); },
function (err) { console.log('Error: ' + err); },
function () { console.log('Completed'); });Next: 1 Completed
If the source Observable emits no items (or no items that match the predicate), first
will terminate with a “Sequence contains no elements.” onError
notification.
The single operator is similar, except that it only emits its item once the source
Observable successfully completes after emitting one item (or one item that matches the predicate). If it
emits either no such items or more than one such item, single will terminate with an
onError notitifcation (“Sequence contains no elements.”).
The find operator is much like first except that the predicate argument is
mandatory, and it behaves differently if no item from the source Observable matches the predicate.
While first will send an onError notification in such a case, find
will instead emit an undefined item.
var array = [1,2,3,4];
var source = Rx.Observable.fromArray(array)
.find(function (x, i, obs) {
return x === 5;
});
var subscription = source.subscribe(
function (x) { console.log('Next: ' + x); },
function (err) { console.log('Error: ' + err); },
function () { console.log('Completed'); });Next: undefined Completed
The findIndex operator is similar to find, except that instead of emitting
the item that matches the predicate (or undefined), it emits the zero-based index of that
item in the source Observable’s sequence (or -1).
var array = [1,2,3,4];
var source = Rx.Observable.fromArray(array)
.findIndex(function (x, i, obs) {
return x === 5;
});
var subscription = source.subscribe(
function (x) { console.log('Next: ' + x); },
function (err) { console.log('Error: ' + err); },
function () { console.log('Completed'); });Next: -1 Completed
find, findIndex, and first are found
in each of the following distributions:
rx.all.jsrx.all.compat.jsrx.aggregates.jsThey each require one of the following distributions:
rx.jsrx.compat.jsrx.lite.jsrx.lite.compat.jsTBD
TBD